Amateur Radio kits.IN

Log in to post an entry

46 entries.
 rekarstien wrote on November 16, 2018 at 8:38 pm:
I just received my uBitx this afternoon and I was going to order the case with the 2.8 Nextion display and I see you are going to have a case with the 5 inch Nextion display what is the price going to be for them and do you have a date they will be available. Thanks Bob
Admin Reply by: Sunil Kumar Lakhani
Hi Bob The Nextion 5 inch case will be available by the first week of December 2018 also possible in last week of November. The case is bigger in size. The size is 10 X 10 X 4.5 inches . And case for 3.5 Inch Nextion case size 9X9X4 Inches. Price will be slightly higher. Thanks for the inquiry. best of 73s Sunil
 Gary.ingle from Durban South Africa wrote on October 24, 2018 at 3:47 pm:
Please assist by sending instructions on how to connect the TX RX led supplied with the bitx40 enclosure.
Admin Reply by: Sunil Kumar Lakhani
Which Bitx 40 HF Signal's or Bitx3B 3C for 40?
 qrpdude.41 wrote on September 6, 2018 at 6:56 pm:
Just received my full Grey uBitx case with all the extras. I had been looking at your pictures for your previous single band products and then wishing I had a manual with these quality pictures for my uBitx kit and case. Your products are terrific but with the increasing complexity and multiple support boards, these pictures/manual become necessary for construction. When will one be available. TNX
Admin Reply by: Sunil Kumar Lakhani
Thanks for the feedback. We have opened our website where you can find some good info on the boards and construction for ubitx with modules
 mark lidd from Vienna wrote on July 6, 2018 at 10:00 pm:
Sunil - placed two orders recently and I will be ordering a ubitx case when they are available. Hold the orders to ship in one package if easier for you -thx
 Douglas S. Basberg from Clarkston wrote on July 6, 2018 at 1:34 am:
I was not expecting the digital board with USB and 9 pin rs232 and two stereo plugs. Is there a source for info on hookup of 9 pin and stereo jacks? Thanks, Doug
 g7klj from london wrote on June 27, 2018 at 12:04 pm:
Hello, any update for Order #1614 ? Thanks!
 PA3GAG wrote on June 26, 2018 at 6:24 pm:
I just received my ubitx case, thank You Sunil for the nice product it is verry complete including 3 PCB's and all morning materiaal. I will start tonight with building my radio. Greetings Rien PA3GAG.
 rafflesjeep from Penang wrote on June 26, 2018 at 1:34 am:
May I know what is the order for ubix shipment. Order since 25/5. Still in process?
 Wa3bm wrote on June 19, 2018 at 4:48 pm:
Sunil is the AGC board just a bare board or is it populated? I assume it will work with the uBitx Bernie
 ag7mz wrote on June 15, 2018 at 8:44 pm:
How long until my order from June 5 will ship? Would a different color ship faster? Thanks! wrote on June 12, 2018 at 3:26 pm:
Hello Sunil, can you tell me if the female to female connector come with the front panel board kit?
Admin Reply by: Sunil Kumar Lakhani
Not yet. But planning a kit with connectors with it soon
 José Machado from Coimbra wrote on June 9, 2018 at 10:09 pm:
Hi! I received my uBitx after 7 weeks. The next day was working well. Then, with time, the box and ... did not close. This is an evolutionary process, Hi!
 GM4JJJ wrote on June 7, 2018 at 11:38 am:
Thank you for the update Sunil, I have now received my uBITX case kit via DHL, it is excellent. Just a note, not a complaint, I had to pay DHL 19 UKP for duty or VAT and their handling charge, though I did not get an exact breakdown of how they calculated that figure. I am almost better using the slower India Post as in my experience they deliver directly and don't charge for extras. I realise that it would not be so secure and easily tracked as DHL, but on a relatively low cost item it isn't such a risk, I just object to DHL charging such high handling charges on low value goods. Not ab complaint about your procedure at all, that was exemplary. Wishing you further success with what I am sure will be a very popular product line for you. Best regards.
 PA3GAG wrote on June 2, 2018 at 8:40 am:
Hallo Sunil, can You tell me which order number of ubitx case is now shiped ? I am over 7 weeks not able to pick up the parcel at the post office for 3 weeks and pay for the custom duties. Best regards Rien PA3GAG
Admin Reply by: Sunil Kumar Lakhani
We are finishing of with all April orders in 2 days. We will be starting may orders by the 6th June. Your Case is being packed and will be shipped hopefully tomorrow . Thanks
 la9gj38 from Åmot wrote on May 31, 2018 at 7:06 pm:
Received µBitx a few days ago, but waiting for the Maroon Case. 73 de Kjell
Admin Reply by: Sunil Kumar Lakhani
Hi Kjell You have received the case as per your confirmation regards Sunil wrote on May 29, 2018 at 5:45 pm:
Sunil. back on April 15th you wrote in the news letter that a manual for the ubitx case was to be released very soon, any idea on when that will happen? thak you.
Admin Reply by: Sunil Kumar Lakhani
It will happen soon. There was some problem with the audio chip and we were waiting for the front panel pcb. The Front Panel PCB is ready and working good. I will begin very soon. Front panel board is very easy. Just connect two 8 pin Female to Female Connectors on Analogue and Digital Ports, Thanks
 PA3GAG wrote on May 25, 2018 at 7:32 pm:
Hallo Sunil, can you inform me about the expected shipping date of the ubitx case wisch I ordered 29 of april. Best regards Rien PA3GAG.
Admin Reply by: Sunil Kumar Lakhani
Kindly keep a check on India Post site for tracking as your case been shipped and updated on our website and PayPal regards
 Andre le Roux from Despatch wrote on May 20, 2018 at 4:26 pm:
Ordered my maroon enclosure 3rd April 2018. DHL option and payed with PayPal. NO communication received from Sunil up to date !! I send quite a few e-mails with my proof of payment, NO reply as yet! What the heck is going on?? Still waiting....can somebody advise what to do??? 73 Andre ZS2AL
Admin Reply by: Sunil Kumar Lakhani
Andrew I think i gave you a reply that your case would be shipped by this Saturday or early next week, to South Africa
 David from Dunfermline UK wrote on May 18, 2018 at 10:51 pm:
John, I am in the same position, I ordered a uBITX case on 27th April and no word of despatch, still says processing order. I have tried to contact via webpage, but no reply yet. Lack of recent postings by the owner is slightly worrying, but I imagine and hope that the problem is too much demand and work. I am not particularly worried as PayPal protects payments made if there is any problem. It would be nice if the owner could put up a status report on this site to reassure us.
Admin Reply by: Sunil Kumar Lakhani
Hi David Anderson GM4JJJ Yes you are right we have 400 orders to process and lot of work at hand. We do try to reply emails. We had mentioned that these are pre order bookings and never said that they would be shipped immediately on purchase. Every customer wants an update of the shipping that is good, but we do not have so many resources to fulfill needs of 400 to 500 customers at a go. Presently most pre booking coming to an end, so are commitment is to ship all pre orders within 30 to 40 days max. Our next lot want be of pre bookings but ready sales on the go. We have been doing bitx kits biz for over a decade so you guys do not need to be afraid of your money. We are in Kits biz for over a decade with Bitx and other kits and hope to continue for long. It may take some extra time but the delivery is guaranteed for sure . Those who do not wish can claim an mediate refund. I have replied to your guest comment and put in some extra clarifications for other customers. As for yours order shipping will try best to ake by next week Thanks and best of 73s Sunil
 John from Missouri wrote on May 14, 2018 at 11:49 am:
I'm also wondering how long it takes to ship a uBITX case that is in stock (maroon one). I've sent emails of inquiry on status and have received no responses.
HTML Snippets Powered By :

Your Cart