Amateur Radio kits.IN

Log in to post an entry

46 entries.
 rekarstien wrote on November 16, 2018 at 8:38 pm:
I just received my uBitx this afternoon and I was going to order the case with the 2.8 Nextion display and I see you are going to have a case with the 5 inch Nextion display what is the price going to be for them and do you have a date they will be available. Thanks Bob
Admin Reply by: Sunil Kumar Lakhani
Hi Bob The Nextion 5 inch case will be available by the first week of December 2018 also possible in last week of November. The case is bigger in size. The size is 10 X 10 X 4.5 inches . And case for 3.5 Inch Nextion case size 9X9X4 Inches. Price will be slightly higher. Thanks for the inquiry. best of 73s Sunil
 Gary.ingle from Durban South Africa wrote on October 24, 2018 at 3:47 pm:
Please assist by sending instructions on how to connect the TX RX led supplied with the bitx40 enclosure.
Admin Reply by: Sunil Kumar Lakhani
Which Bitx 40 HF Signal's or Bitx3B 3C for 40?
 qrpdude.41 wrote on September 6, 2018 at 6:56 pm:
Just received my full Grey uBitx case with all the extras. I had been looking at your pictures for your previous single band products and then wishing I had a manual with these quality pictures for my uBitx kit and case. Your products are terrific but with the increasing complexity and multiple support boards, these pictures/manual become necessary for construction. When will one be available. TNX
Admin Reply by: Sunil Kumar Lakhani
Thanks for the feedback. We have opened our website where you can find some good info on the boards and construction for ubitx with modules
 mark lidd from Vienna wrote on July 6, 2018 at 10:00 pm:
Sunil - placed two orders recently and I will be ordering a ubitx case when they are available. Hold the orders to ship in one package if easier for you -thx
 Douglas S. Basberg from Clarkston wrote on July 6, 2018 at 1:34 am:
I was not expecting the digital board with USB and 9 pin rs232 and two stereo plugs. Is there a source for info on hookup of 9 pin and stereo jacks? Thanks, Doug
 g7klj from london wrote on June 27, 2018 at 12:04 pm:
Hello, any update for Order #1614 ? Thanks!
 PA3GAG wrote on June 26, 2018 at 6:24 pm:
I just received my ubitx case, thank You Sunil for the nice product it is verry complete including 3 PCB's and all morning materiaal. I will start tonight with building my radio. Greetings Rien PA3GAG.
 rafflesjeep from Penang wrote on June 26, 2018 at 1:34 am:
May I know what is the order for ubix shipment. Order since 25/5. Still in process?
 Wa3bm wrote on June 19, 2018 at 4:48 pm:
Sunil is the AGC board just a bare board or is it populated? I assume it will work with the uBitx Bernie
 ag7mz wrote on June 15, 2018 at 8:44 pm:
How long until my order from June 5 will ship? Would a different color ship faster? Thanks! wrote on June 12, 2018 at 3:26 pm:
Hello Sunil, can you tell me if the female to female connector come with the front panel board kit?
Admin Reply by: Sunil Kumar Lakhani
Not yet. But planning a kit with connectors with it soon
 José Machado from Coimbra wrote on June 9, 2018 at 10:09 pm:
Hi! I received my uBitx after 7 weeks. The next day was working well. Then, with time, the box and ... did not close. This is an evolutionary process, Hi!
 GM4JJJ wrote on June 7, 2018 at 11:38 am:
Thank you for the update Sunil, I have now received my uBITX case kit via DHL, it is excellent. Just a note, not a complaint, I had to pay DHL 19 UKP for duty or VAT and their handling charge, though I did not get an exact breakdown of how they calculated that figure. I am almost better using the slower India Post as in my experience they deliver directly and don't charge for extras. I realise that it would not be so secure and easily tracked as DHL, but on a relatively low cost item it isn't such a risk, I just object to DHL charging such high handling charges on low value goods. Not ab complaint about your procedure at all, that was exemplary. Wishing you further success with what I am sure will be a very popular product line for you. Best regards.
 PA3GAG wrote on June 2, 2018 at 8:40 am:
Hallo Sunil, can You tell me which order number of ubitx case is now shiped ? I am over 7 weeks not able to pick up the parcel at the post office for 3 weeks and pay for the custom duties. Best regards Rien PA3GAG
Admin Reply by: Sunil Kumar Lakhani
We are finishing of with all April orders in 2 days. We will be starting may orders by the 6th June. Your Case is being packed and will be shipped hopefully tomorrow . Thanks
 la9gj38 from Åmot wrote on May 31, 2018 at 7:06 pm:
Received µBitx a few days ago, but waiting for the Maroon Case. 73 de Kjell
Admin Reply by: Sunil Kumar Lakhani
Hi Kjell You have received the case as per your confirmation regards Sunil wrote on May 29, 2018 at 5:45 pm:
Sunil. back on April 15th you wrote in the news letter that a manual for the ubitx case was to be released very soon, any idea on when that will happen? thak you.
Admin Reply by: Sunil Kumar Lakhani
It will happen soon. There was some problem with the audio chip and we were waiting for the front panel pcb. The Front Panel PCB is ready and working good. I will begin very soon. Front panel board is very easy. Just connect two 8 pin Female to Female Connectors on Analogue and Digital Ports, Thanks
 PA3GAG wrote on May 25, 2018 at 7:32 pm:
Hallo Sunil, can you inform me about the expected shipping date of the ubitx case wisch I ordered 29 of april. Best regards Rien PA3GAG.
Admin Reply by: Sunil Kumar Lakhani
Kindly keep a check on India Post site for tracking as your case been shipped and updated on our website and PayPal regards
 Andre le Roux from Despatch wrote on May 20, 2018 at 4:26 pm:
Ordered my maroon enclosure 3rd April 2018. DHL option and payed with PayPal. NO communication received from Sunil up to date !! I send quite a few e-mails with my proof of payment, NO reply as yet! What the heck is going on?? Still waiting....can somebody advise what to do??? 73 Andre ZS2AL
Admin Reply by: Sunil Kumar Lakhani
Andrew I think i gave you a reply that your case would be shipped by this Saturday or early next week, to South Africa
 David from Dunfermline UK wrote on May 18, 2018 at 10:51 pm:
John, I am in the same position, I ordered a uBITX case on 27th April and no word of despatch, still says processing order. I have tried to contact via webpage, but no reply yet. Lack of recent postings by the owner is slightly worrying, but I imagine and hope that the problem is too much demand and work. I am not particularly worried as PayPal protects payments made if there is any problem. It would be nice if the owner could put up a status report on this site to reassure us.
Admin Reply by: Sunil Kumar Lakhani
Hi David Anderson GM4JJJ Yes you are right we have 400 orders to process and lot of work at hand. We do try to reply emails. We had mentioned that these are pre order bookings and never said that they would be shipped immediately on purchase. Every customer wants an update of the shipping that is good, but we do not have so many resources to fulfill needs of 400 to 500 customers at a go. Presently most pre booking coming to an end, so are commitment is to ship all pre orders within 30 to 40 days max. Our next lot want be of pre bookings but ready sales on the go. We have been doing bitx kits biz for over a decade so you guys do not need to be afraid of your money. We are in Kits biz for over a decade with Bitx and other kits and hope to continue for long. It may take some extra time but the delivery is guaranteed for sure . Those who do not wish can claim an mediate refund. I have replied to your guest comment and put in some extra clarifications for other customers. As for yours order shipping will try best to ake by next week Thanks and best of 73s Sunil
 John from Missouri wrote on May 14, 2018 at 11:49 am:
I'm also wondering how long it takes to ship a uBITX case that is in stock (maroon one). I've sent emails of inquiry on status and have received no responses.
 la9gj38 from Åmot wrote on May 9, 2018 at 11:16 am:
Received tracking no both for Maroon Case and µBitx PCB May 7th. 73 de Kjell
 Jason Reed from Australia wrote on April 30, 2018 at 9:25 am:
Ordered uBitx case om 11/3/2018 still hasn't arrived. Can anyone tell me how long it took to get theirs after ordering?
 la9gj38 from Åmot, Modum, Norway wrote on April 26, 2018 at 10:13 am:
I wonder ig the Maroon Case has all the holes ready for assambling when it arrives.
 Hans-Peter Fricke from Cannobio-S.Agata wrote on April 20, 2018 at 12:15 pm:
Mein UBITX Case ist gekommen. Seht und staunt Indianpost no, DHL 3 Tage. Danke Sunil für die Koperation. Ich freue mich. Nun werde ich umbauen muss aber noch die Display Grösse auf 2004 anpassen. My UBITX case has arrived. Look and marvel Indianpost no, DHL 3 days. Thank you Sunil for the cooperation. I'm glad. Now I will have to rebuild but still adjust the display size to 2004.
 graemeo from Sydney wrote on April 20, 2018 at 12:07 am:
Just placed an order for the uBix "Maroon case" as it looks really neat! Hope it wont take too long to arrive in Australia 🙂
 Sunil VU2MTM from Trivandrum wrote on April 19, 2018 at 3:53 pm:
Received the Blue case with White Front and back panels.Very Nice ! Good quality of accessories provided.Wish you would put up more detailed instructions and pictures for wiring the additional boards supplied. 73 wrote on April 16, 2018 at 1:20 am:
just received case, amazing what also comes with the kit, couldn't expect making one myself after opening package and seeing how professional a job on printing on face and back. again the quantity of parts that Sunil includes makes this a great buy for those new to building kits! cant wait for the build instructions to finish the project.
 John E Kemker III from Ellenwood wrote on April 15, 2018 at 4:02 am:
Putting together my uBITX in one of your cases. Nice case! Would like to know if you could post some better pictures on how to wire up the encoder board and other assembly tips. wrote on March 31, 2018 at 2:26 pm:
placed order for dark grey ubitx case 3/10/18 hope to see it soon!
 frrichard wrote on March 22, 2018 at 6:39 pm:
Just ordered a blue case for my uBitx. I have the uBitx, though haven't put it together, as I have now just ordered the case, so hope it will be soon. Thanks 73
 w7hd from Tucson, AZ wrote on March 10, 2018 at 1:44 pm:
Got the case for the bit40, but now needed one for the ubitx (now on order). What great quality! A superb paint job that doesn't scratch easily, and clear easy-to-read lettering.
 Santa wrote on March 1, 2018 at 2:15 pm:
Ordered a uBITX case in DA Grey. I am very excited and can't wait for it to ship. My uBITX was also just ordered.
 carlbohman wrote on February 26, 2018 at 11:37 am:
Would like to order a uBitx case in Siemens gray... But order page will not let me select shipping costs... :(:(:(
 w7hd from Tucson wrote on February 20, 2018 at 9:02 pm:
Have the ubitx working. Now to get it into the nice blue case with knobs and things.!. from Nunspeet wrote on February 2, 2018 at 1:39 pm:
I' m looking forward to order a uBITX case!
 AlanT wrote on January 31, 2018 at 12:53 pm:
+1 for the uBitx case. I have a set of boards with nowhere to go 🙂
 kk4ywi from Hays, NC wrote on January 10, 2018 at 3:16 am:
Waiting patiently for my ubitx to arrive. Would love to see the case design.
 ZS2OE wrote on December 31, 2017 at 12:00 am:
I have just about completed the BITX20 Ver3B and it has been greatly enjoyed. Thanks Sunil for your tremendous kit and his support along the way. Looking forward to my first QSO with the radio soon ! 73 de Paul
Admin Reply by: Sunil Kumar Lakhani
Thanks Paul for the great feedback. Really appreciate the way you have build your Bitx3B 20mt. Wish you many contacts on the air. best of 73s Sunil VU3SUA
 N8DAH from Garden City wrote on December 27, 2017 at 8:46 pm:
Ordered WA2EBY pcb set. Great buy will be on air soon!. Note:Some of the things in the walk through have been update on this version of the board!. No worries on making 510 holes bigger or the ground posts. Great stuff!!! Great Service!!
 G3VDS from Hyde wrote on December 23, 2017 at 6:14 pm:
There are lots of amateurs would like to buy a custom enclosure for the new uBITX.. Do you have any plans to make and sell one?? Put me down on your list. 73 Roy
 kevington from Mount Waverley, Vic wrote on October 25, 2017 at 6:57 am:
Maroon BITX case and associated items arrived today in faultless condition and rapid delivery via India Post. Thanks, Sunil
 kevington from Mount Waverley, Victoria, Australia wrote on October 13, 2017 at 5:16 am:
Enclosure and accessories arrived via India Post today, 13 Oct 2017, having been posted on 4 Oct 2017. Packaging superb and contents arrived without dent or scratch. Many thanks, Kevington VK3DAP / ZL2DAP
 mikethetiger from Tessenderlo wrote on September 5, 2017 at 4:17 pm:
Nice site, good stuff. ON5KB
 Ramesh from Bangalore wrote on March 1, 2017 at 2:18 pm:
Hi Sunil best Wishes Regards VU3VRL
 Atanu Dasgupta from Gurgaon wrote on March 1, 2017 at 1:12 pm:
Good to see this site!
 Jaydip Banerjee from Baharampore, WB wrote on March 1, 2017 at 1:04 pm:
All items are fully tested and really good
HTML Snippets Powered By :

Your Cart