EASY BITX SSB TRANSCEIVER VERSION 2. NOW YOU CAN GET 20 WATTS WITH THIS TCVR WITH USING IRFP 150 FET , DETAILS ARE GIVEN IN OUR YOU TUBE VIDEO, LINK BELOW.

THE EXCITER PCB IS PRE-SOLDERED WITH COMPONENTS. THE VFO AND BFO IS ALSO BUILD AND WORKING.  THE ONLY JOB IS TO WIND THE BAND PASS AND LOW PASS FILTER COILS AND CALIBRATE THE TCVR.  THE BLACK COILS ARE PROVIDED FOR THE SAME. FOR BANDPASS FILTER IT ALSO POSSIBLE TO USE READY MADE BPF FROM QRP LABS AND MOUNT THE BOARD OVER THE EXISTING BAND PASS FILTER IF YOU FIND IT HARD TO WIND THE COILS.

 

 

THIS MOD IS RECOMMENDED FOR 40MT BAND

 

——————————————————————————————————————————————————————————————————————-

Black Enclosure With Siemens Grey Panels

Add a note if kit is required for 40mt or 20mt Band.

Construction can be followed of Easy Bitx Version 1 which is similar to Easy Bitx version 2

The Easy Bitx is the latest kit from INKITS in series of earlier

Bitx Kits. The Kit provides an educational experience in building an

ssb transceiver for old and new radio amateurs.

Highlight Of Easy Bitx :

1. Mono Band can be used for any single band 80mt,40mt ,20mt
2. Easy to construct.
3. SSB Mode
4. Power Output 3 Watts on 20mt
5. Power Output 5 watts on 40mt
6. Single Double sided through hole pcb
7. Complete Manual Downlaod
8. Kit comes complete with Components for Exciter.AGC
9. BFO VFO Audio Board
10. Enclosure available in few colors.

  List  1 : Accessories For Easy Bitx Kit

 

1. Relimate Wire Kit
2. Copper Wire #SWG 28 One Roll
3. Copper Wire #SWG 38 One Roll
4. Spiral
5. Electric Wire Red Black
6. SMA Connectors & Rf Cable 174 U 3 Nos
7. DC Power Cable
8. Heat Shrink Tube
9. Nylon Ties And Pads 6 Nos
10. Stereo Sockets 2 Nos
11. DC Socket 1 Nos
12. Brass Stand 8 Nos
13. Power Switch On/Off 1 No
14. Led On /Off 1 Nos
15. Encoder 1 No
16. Fuse Holder 1 Nos
17. Mic Socket and Plug 1 Nos set
18. Knobs 2 nos
19. Heat Sink 1 Nos
20. SO239 Ant Connector 1 Nos
21. Speaker 1 No
22. Acrylic Cover LCD 1 Nos

 

List  2 :  Easy Bitx Kit components

 

1. Printed Circuit Board Easy Bitx Exciter 1 Nos
2. Printed Circuit Board Easy Bitx 1 VFO BFO Audio Amp 1 No
3. Easy Bitx Enclosure
4. Speaker 4 inch

 

Download manual from our website:

There are two manual one is the for the easy Bitx version 1 and the other is for Easy Bitx Version 2

The second manual is not very extensive as the first manual has been found to complete which can be used for the newer version too.

https://amateurradiokits.in

Easy Bitx

 

 

Weight	1.95 kg
Dimensions	858.5 × 8.5 × 3 in